Model | HBC-60(F) |
| nominal cooling capacity | kcal/h | 156176 |
| kw | 181.6 |
| input power | kw | 57.28 |
| power supply | 3PH/380V/50HZ |
| refrigerant | type | R410a |
| type of control | Expansion valve |
| compressor | type | hermetic scroll |
| power(kw) | 49.6 |
| condenser | type | finned copper tube + low noise outer rotor fan |
| cooling air flow(m3/h) | 60000 |
| evaporator | type | Shell and tube |
| chilled fluid flow(m3/h) | 31.31 |
| volume(L) | 750 |
| inlet and outlet pipe diameter (inch) | 3 |
| pump | power (kw) | 4 |
| lift(m) | 22 |
| safety protection | compressor over temperature, over current, high and low pressure,
over temperature, flow switch, phase sequence, phase-missing,
exhaust overheating, anti-freezing |
| weight | kg | 1650 |
| dimension | mm | 2700*2200*2050 |
Portable Water Chiller Features
1. The portable air cooled industrial chiller uses in small to
medium cooling loads. Typically, available for 3 to 185 kW (0.85 to
52.6ons) with scroll compressor.
2. This 60 tons water chiller designed with Danfoss scroll
compressor, efficient V-type condenser, Danfoss or Copeland
thermostatic expansion valve, S.S 304 water tank and Schneider
electric component.
3. The portable chillers are complete safety devices are equipped
,including compressor over temperature, over current, high and low
pressure, over temperature, flow switch, etc. to ensure the chiller
unit running stably with long service time.
4. Environment-friendly refrigerant R407C, R410A, R404A, R134a,
etc, which is no harm to the ozone layer.
5. The industrial water chillers are designed with micro controller
to ensure control accuracy. The interface is displayed in English,
easy operation.
What we will do before chiller delivery ?
1. After industrial chiller assembly, we will charge nitrogen for
pressure maintaining testing for 24hrs, to check whether there is
leakage in the chiller cooling system.
2. Drain the nitrogen,vacuum the chiller system and set up
parameters, then power on chiller and charge refrigerant at the
same time.
3. Debug and test the chiller unit.
4. After the chiller commissioning, cleaning and labelling chiller
unit, then have pre-delivery inspection before packing with plywood
cases to to ensure that the chiller can be in good condition during
transit.
How to select the model of the chiller ?
1. We need to know the heat load of your process or chiller cooling
capacity.
2. Required water temperature, water pressure and flow rate.
3. Application and power supply in local.
4. Max. Ambient temperature in summer day.
