Home > Cooling Towers >

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

Product Categories

Industrial Water Chiller [22]
Portable Water Chiller [115]
Screw Type Chiller [6]
Water Cooled Chiller [40]
Air Cooled Screw Chiller [61]
Water Cooled Screw Chiller [69]
Laser Chiller Unit [22]
Water Cooled Central Chiller [6]
Air Cooled Inverter Chiller [14]
Heating And Cooling Chiller [12]
Inverter Water Chiller [9]
Water Cooled Industrial Chiller [9]
Industrial Chiller Integrated System [16]
Portable Glycol Chiller [1]
Cooling Towers [10]
Water Cooled Glycol Chiller [2]
Mould Temperature Controller [24]
Low Temperature Chiller [25]

Shenzhen Anges Machinery Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

Ask Lasest Price
Brand Name :	ANGES
Model Number :	60ton
Payment Terms :	T/T
Delivery Time :	15 days

Add to Cart

Product Details
Company Profile

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

60tons cooling tower technical parameters

Model		STG-60
Basic parameter	Type	Counter current circular cooling tower
	Nominal flow	46.8m³/h
	Inlet/outlet temperature	37℃／32℃
	Dry-bulb temperature	31.5℃
	Wet-bulb temperature	27℃
	Cooling capacity	234000kcal/h
	Noise (dB(A))	61dB(A)
	Power	380V／3P／50Hz
	Water quality	PH＝6 to 8
	N.W／G.W	240kg／1250kg
Fan	Fan type	Axial Flow
	Cooling air flow(m3/h)	28080m³/h
	Rotation speed(r/min)	710r/min
	Diameter	930 mm
	Quantity	4 pieces/set
	Electronic box	Water proof type
	Power	1.1kw
	Start-up mode	Direct start
Size	Height × diameter(H×φ)	2700×1980mm
	Inlet pipe caliber	100mm
	Outlet pipe caliber	100mm
	Full outlet/drain off pipe caliber	25mm／25mm
	water supply pipe caliber	20mm
Material	Sprinkler	P.V.C-U
	Casing	Fiberglass
	Water basin
	Fan	A.B.S.
	Electronic box	Water proof type
	In -fill	P.V.C.
	Shelf	Hot-dip galvanized steel

WORKING PRINCIPLE

A cooling tower is designed to remove heat from a building or
facility by spraying water down through the tower to exchange heat
into the inside of the building. Air comes in from the sides of the
tower and passes through the falling water.
A cooling tower is a device that rejects waste heat to the
atmosphere through the cooling of a coolant stream, usually a water
stream to a lower temperature.
Cooling towers may either use the evaporation of water to remove
process heat and cool the working fluid to near the wet-bulb air
temperature or, in the case of dry cooling towers, rely solely on
air to cool the working fluid to near the dry-bulb air temperature
using radiators.

Advantages

Tower body temperature weight: reduce the design requirements for
the foundation and installation costs.
The cooling water volume of the tower can be adjusted: for a given
type of cold water tower, with working water pressure change (that
is, flow change) in and out of the water temperature difference is
generally unchanged, so you can increase the water supply pressure
method to improve the cooling water volume of the tower (within the
scope of the spray device), but also can change the nozzle aperture
method to adjust the tower water volume and temperature drop.
No plugging, no maintenance, stable and reliable operation. A
series of phenomena that affect the performance of the tower and
process system equipment such as the plugging of the packing column
due to the impurities in the circulating water, the aging of the
packing, the deformation, the brittle-cracking, the plugging and
flushing of the sprinkler head, the plugging of the packing
brittle-chip in the pipeline, the pump and the heat exchanger are
completely eliminated. It completely eliminates the trouble of
frequent cleaning, replacement of filler and spray nozzle
Main Features
Small floating water rate: the spray device is evenly distributed
in the tower, and the outlet area is about twice as large as that
of the traditional power tower, so the wind speed is small. At the
same time, the top of the tower is installed with excellent
performance of the water collection device, which minimizes the
amount of floating water, and eliminates a lot of water refill.
​ Good cooling effect: the hot water in the tower exchanges heat
with the incoming air under the condition of mist. Due to the small
wind resistance in the tower and the reasonable design of air duct
and wind blade, the ratio of air to water is improved.
Common applications include cooling the circulating water used in
oil refineries, petrochemical and other chemical plants, thermal
power stations, nuclear power stations and HVAC systems for cooling
buildings. The classification is based on the type of air induction into the
tower: the main types of cooling towers are natural draft and
induced draft cooling towers.

Product Tags:

60 Ton Cooling Towers

Cooling Towers 380V

50Hz chiller tower

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Anges Machinery Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Cooling Towers products from this supplier

Find Similar Products By Category:

General Industrial Equipment

Hot Searches:

Shenzhen Anges Machinery Co., Ltd

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

WORKING PRINCIPLE

A cooling tower is designed to remove heat from a building or facility by spraying water down through the tower to exchange heat into the inside of the building. Air comes in from the sides of the tower and passes through the falling water.

A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream to a lower temperature.

Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb air temperature using radiators.

Advantages

Tower body temperature weight: reduce the design requirements for the foundation and installation costs.

Main Features

​ Good cooling effect: the hot water in the tower exchanges heat with the incoming air under the condition of mist. Due to the small wind resistance in the tower and the reasonable design of air duct and wind blade, the ratio of air to water is improved.

60 Ton Cooling Towers

Cooling Towers 380V

50Hz chiller tower

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

Good cooling effect: the hot water in the tower exchanges heat with the incoming air under the condition of mist. Due to the small wind resistance in the tower and the reasonable design of air duct and wind blade, the ratio of air to water is improved.