Water Cooled 50HP Screw Chiller Plastic Process Chiller 50ton Screw
Chiller Process Cooling Equipment Glycol chiller
Which industrial applications need water chiller?
Industrial water chillers are widely used in many industries like
plastic and rubber manufacturing, electronic productions,
electroplating, medical chemistry, ultrasonic cooling and printing
business, etc.In the plastic manufacturing process, the chillers
are used to cold the molds. It can accurately controls the
temperature and cooling time by providing stable temperature, flow
and pressure water to the molds. An adequate cooling system is
required in some of the process of the plastic industry, ensuring
the highest quality final products.
The industrial water chiller temperature is from -45 to +30 ℃,
compared with the water tower, the chiller can meet the various
temperature requirements of industrial production. Choosing the
right kind of industrial chiller for process cooling can lower
cooling costs, minimize downtime, and improve operational
efficiency.
Should I Choose a Water cooled chiller or Air-cooled chiller for my
plastic process?
Water-cooled screw chillers are generally more efficient than
air-cooled chillers, but higher cost in installation and
maintenance due to the additional cooling water tower, tanks, and
cooling pump.
The water screw chiller is used for large capacity, it can be a
plastic central chiller to cool several processes, in this way ,you
can ruduce the chillers in the factory by using a central chiller,
easiler for operation and maintenance.
Plastic Central Chiller Specification
Model Item | AGS-050WSH |
| nominal cooling capacity | kcal/h | 161422 |
| kw | 187.7 |
| input power | kw | 39 |
| max running current | A | 88.9 |
| power supply | 3PH-380V-50HZ |
| refrigerant | type | R22 |
| type of control | expansion valve |
| compressor | type | semi-hermetic screw |
| quantity | 1 |
| start-up mode | Y-△ |
| capacity control | 0-33-66-100 |
| evaporator | type | shell and tube |
| chilled fluid flow (m3/h) | 32.3 |
| pipe diameter (inch) | 3 |
| condenser | type | shell and tube |
| cooling water flow (m3/h) | 39 |
| pipe diameter (inch) | 3” |
| safety protection | compressor over temperature protection, over load protection, high
and low pressure protection, flow switch protection, reversed and
lacking phase protection, anti-freezing protection,fusible
protection. |
| dimension | mm | 2130*855*1540 |
| net weight | kg | 950 |
| running weight | kg | 1060 |
Benefit of industrial chiller applications
- Water-coold screw chillers could accurately provide the needed
temperature for industrial manufacturing and largely improve
efficiency.
- Accurate temperature control capability, the freezing temperature
can be accurate to ±1℃, ensure the highest quality final products.
- Chillers can decrease equipment depreciation and degradation to cut
down on operating expenditures.
- TheScrew compressors can achieve comparable part-load efficiencies,
whether you run your chiller more often at part or full load, it
will save energy.
Features of water-cooled water screw chillers
- Adjustable water temperature: Water cooled type chiller outptu chilled water from +5 to
+30℃.Water temperature and flow rate can be designated and
adjustable in control range.
- Stable performance: Screw compressor chiller is smple structure, less moving parts, low
failure rate, high safety factor, large cooling capacity.
- Power saving and energy saving: Screw chiller capacity control can be four (100%-75%-50%-25%) or
three (100%-66%-33%) automatic adjustment ability, which can
effectively save energy consumption according to the actual use of
heat load, so as to effectively save energy.
- Long service life: Shell and tube evaporator and condenser, the welded structure is
simple, sturdy structure, high quality, compact structure, long
life and so on.
- Simple installation and operation: This 60hp extruder chiller can be a central chiller to cool several
processes, easy installation and operation with lower cost. It can
work after connecting the production lines with water pipes. Small size, easy to install, and simple to operate.
Water chiller service from manufacturer
- All the chillers are provided with 12 months free maintenance
service.
- Provide technical explanation, chiller debugging support, technical
training and chiller maintenance guidance.
- If necessary, after-sales engineers can be on-site service
confirmed by both parties through communication .In some areas,
local dealers can provide fast and convenient service.
- Provide the air chiller and water chiller required parts quickly to
ensure the normal use of customers.If necessary, part of the
wearing parts can be provided for backup after confirmation by both
parties.
- Chiller maintenance service outside the warranty period, life-long
tracking maintenance, cost price to provide equipment parts.
Industrial water cooled Chiller installation
This water cooled screw chiller system including the items below:
Chiller
Cooling tower
Condenser cooling pump
process chilled water pump
- Install the chiller unit in a steady, ventilated and
easy-installation place, avoid corrosion, pollution and
weather-beaten.
- Choose a suitable cooling tower to match the chiller unit.
- Pipeline should be installed according to the dimension of the
chiller. Do not reduction the size of the hose, or it will affect
the refrigeration effect and increase the power consumption.
- The chiller unit must be installed more than 1 meter away from the
wall, so that it is easy to install, maintain and adjust
